How to Connect a BrosTrend Extender to a Deco Mesh Router

The Deco mesh system is one of the leading mesh network solutions worldwide, consisting of three devices in a typical setup. A common question that arises is: Can a BrosTrend WiFi extender connect to a Deco mesh router?

The answer is YES. In this guide, we'll walk you through the process of linking a BrosTrend WiFi extender to your Deco mesh router. The first step is to check your Deco router's settings using the Deco app on your phone, then proceed with connecting the BrosTrend WiFi extender.

Step 1: Check Deco Router Settings

1. Open the Deco app on your phone and log in using the admin username and password.

2. Select the Deco router node you want to check.

3. Verify that all settings are correct, ensuring the router is properly connected, the network is functioning, and the Deco node is active.

4. If needed, you can reboot the Deco node by turning the device off and back on. Simply press the power button twice to reboot.

Step 2: Connect the BrosTrend WiFi Extender to the Deco Mesh Router

1. Plug the BrosTrend WiFi extender into a power outlet within range of your Deco router.

2. Use the WPS (Wi-Fi Protected Setup) method to connect the devices:

   • Press the WPS button on your Deco router.

   • Within 2 minutes, press the WPS button on the extender.

   • The devices should automatically connect within a few minutes.

3. Once connected, you can proceed to configure the extender with the recommended settings for the best BrosTrend WiFi extender setup.

Step 3: Access the Interface and Complete Setup

1. Connect your laptop or computer to the BrosTrend WiFi extender’s network via the Ethernet port.

2. Open a web browser and enter either "re-brostrend.com" or the IP address "192.168.0.254" in the address bar.

3. Press ENTER to access the login interface.

4. Enter the admin username and password and click the LOGIN button to access the dashboard.

5. Here, you can adjust network settings and complete the setup process for the BrosTrend WiFi extender.

Conclusion

In conclusion, it’s definitely possible to link a BrosTrend WiFi extender to a Deco mesh router. This guide provides all the necessary steps for setting up and configuring the BrosTrend WiFi extender successfully. By following these steps, you’ll be able to complete your BrosTrend WiFi extender setup with ease and improve your network coverage.