How to Set Up Virgin Media Hub 3

Virgin Media offers a range of home networking devices known as Hubs, including Hub 2, Hub 3, Hub 4, and the latest Hub 5. This guide focuses on the Virgin Media Hub 3, covering everything from its LED indicators and ports to how you can configure it in modem or router mode, along with helpful troubleshooting tips. Virgin Media Hub 3: Lights and Ports Overview

Your Hub 3 features various LED indicators and ports that help show the device’s status and allow you to connect other devices.

LED Indicators:

• Power LED: Confirms that the Hub is powered on.

• WPS LED: Lights up when connecting to WiFi Pods or a range extender.

• WiFi LED: Shows WiFi signal strength and connection to your ISP or modem.

• Phone LED: Indicates a telephone line is connected.

• Internet LED: Displays the status of the internet connection.

• Ethernet Port LEDs: Signal active wired connections to other devices.

Ports:

• Ethernet (LAN) Ports 1–4: Use these to connect wired devices like PCs or smart TVs.

• Internet WAN Port: Connects to an external modem using an Ethernet cable.

• Tel Port: For connecting a landline phone.

• ISP Connector: Used to connect to your ISP in modem mode via a coaxial cable.

• Power Connector: Connects the Hub to a power source.

Setting Up Virgin Media Hub 3 in Modem Mode

Modem mode allows the Hub to function as a direct link to your ISP, supporting only wired connections.

Steps to activate modem mode:

1. Connect the Hub to your ISP socket using a coaxial cable, plugging into the ISP port.

2. Turn on the Hub and connect your PC using an Ethernet cable.

3. Open a web browser and go to 192.168.0.1 to access the Virgin Media login page.

4. Enter the admin credentials printed on the Hub’s label.

5. Once logged in, select your security type, and set your network name and password.

6. Navigate to Modem Mode and enable it.

7. Your Hub is now set up in modem mode and ready for wired internet access.

Setting Up Virgin Media Hub 3 in Router Mode

Router mode enables the Hub to manage and distribute your home WiFi network to multiple devices.

Steps to activate router mode:

1. Connect your modem to the Hub using an Ethernet cable (modem’s LAN port to Hub’s WAN port).

2. Launch a browser and visit 192.168.0.1 to reach the Virgin Media login screen.

3. Use the password from the back of the Hub to log in.

4. Inside the settings, enter your new WiFi name and password.

5. Click Save. The Hub will restart and begin broadcasting your new WiFi network.

Now, you're ready to connect your devices using the updated network credentials Troubleshooting Tips

• Check All Cables: Make sure your Ethernet and coaxial cables are intact and not damaged. If they’re worn or frayed, replace them.

• Use an Updated Browser: Before accessing the Virgin Media login page, ensure your browser is updated. Go to browser settings > About > Check for updates.

• Download the Virgin App: After setup, install the Virgin app (Virgin Media Connect) from the App Store or Google Play. This app allows you to manage your Hub settings, check your WiFi signal strength, and troubleshoot issues directly from your phone.

• Reset to Switch Modes: Want to switch from router mode to modem mode or vice versa? Simply reset the Hub to factory settings and set it up again in your preferred mode.

Conclusion

The Virgin Media Hub 3 is a powerful and flexible device that can be configured as either a modem or a router, depending on your home networking needs. With this guide, you've learned how to set it up, access the Virgin Media login page, use the Virgin app for management, and troubleshoot common problems.

---